UV DTF Application

UV DTF Application Instructions

1. Clean the substrate with alcohol and let dry.
2. Peel design transfer off of backing.
3. Place the transfer on the cup ensuring the design is straight and positioned. (The adhesive is powerful. Once the transfer touches the glass it's impossible to take off).
4. Press the transfer down, working from the center outwards, pushing out any bubbles.
5. Rub all over the design with your finger. The more rubbing the better.
6. Peel the clear film off and you're done!

 

**Hand wash only. We do not advise to put in dishwasher or microwave**